Home

Wide fingers giving additional cable support Terminated wires can be re-routed easily 0.79" slot pitch 0.31" slot width 18 sizes, available in gray, white, or black UL, CSA and Lloyds Register approvedData SheetDrawing Link

PCB Term Blk, 3.50mm, 10 Pole, Top wire, green Data Sheet Contact Altech for 3D Step File at info@altechcorp.com

AC (UL Series) and DC (DL Series) DIN Rail Mounted 17.5mm width Thermal Magnetic 240V, 480Y/277V AC, 50/60Hz 125V DC (1 pole); 125/250V DC (2 pole) 10kA Short Circuit Interrupting Capacity HACR Type 40°C Line/Load reversibleDATA SHEET < Product photo imprint will vary depending on part number selection.

The steel shaft ensures reliable operation even in the toughest conditions.DATA SHEET

DIN Term Blk, Push-In, 4 conn.15A, 600V, 24-14AWG, 3.5mm, black< Product photo color will vary depending on part number selection.DATA SHEET3D STEP FileAccessories

DIN Term Blk, Push-In, Feed-Thru.30A, 600V, 24-10AWG, 6mm, white< Product photo color will vary depending on part number selection.DATA SHEET

Projecting Momentary - Non-Illuminated Metal OperatorClick for Data SheetExploded Assembly ViewUp to six switch contacts can be installed on any non-Illuminated operator Up to four switch contacts can be installed if maintained action attachment (2PPM) is used Switch contacts and operators are sold separately. Preassembled push buttons...

UL1077/508 Busbar System1-57 different pin configurations 1/2 pole spacing (auxiliary switch) available Power Feeding: Power Feed Lugs (115A), Direct Power Feed (115A), Power Feed Block (200A) UL recognized and listed for Altech’s R-Series, ABL’s UR, V-EA and MA Series of Manual Motor Controllers and Supplementary Protectors UL recognized and...

Electrical rating: 115A/1000V AC/DC Wire Ranges: 10-1/0 AWG Cu Wire Temperature Rating: 60°C Required Torque: 5.6Nm (50 lb. in.) Material of Lug: Brass Insulation Material: PolyamideFor use with:UL1077/508 18 and 25sqmm1 phase Busbar

MMS-63H-32A - Manual Motor Starter UL508 (Manual Motor Controller) UL508 (Type E self-protected Manual Motor Controller) CSA C22.2 No.14 IEC 60947-2 & IEC 60947-4-2FeaturesDIN Rail and Screw Mounting Lockable Handle in OFF position Finger safe terminals Class 10 thermal Overload protectio Trip test feature Phase...

EDF CC SeriesModular Fuse HolderCC Type and J Type Fuse HoldersDATA SHEET< Product photo may vary depending on part number selection.

Blue Lens Module  Click for Data Sheet < Product photo may vary depending on part number selection.