Home

DIN Term Blk, Screw, Feed-Thru.20A, 600V, 24-12AWG, 5mm, orange< Product photo color will vary depending on part number selection.DATA SHEET3D STEP FileAccessories

Enclosure, ABS, Gray, smooth walls

A-Coded, LED, 3-pin/ 3-wire, 3x24AWG, PVC cable, black

A-Coded, 90°/ straight, 4x22AWG, PUR cable, black, 10m

Screw Terminals, Plastic Housing, PG7 Plastic Nut

Male, Brass, 22AWG, PVC wires, PG9 thread, 0.5m

Liquid tight strain relief - cable gland for PG21 thread.  Click for Data Sheet or  Click for Full Catalog< Product photo may not be exact.

MV SeriesLCD Voltage Meters1 phase & 3 phase systems 50 to 480 V measurement Accuracy of ± 0.5% of F.S 3 digit LCD display with analog style bargraph Panel mount Supply voltage of 240V AC ±20% , 110V AC ±20%Data Sheet

Wide fingers giving additional cable support Terminated wires can be re-routed easily 0.79" slot pitch 0.31" slot width 18 sizes, available in gray, white, or black UL, CSA and Lloyds Register approvedData SheetDrawing Link

PCB Term Blk, 3.50mm, 2 Pole, Top wire, green Data Sheet Contact Altech for 3D Step File at info@altechcorp.com

Extended/Direct Handle Motor Disconnect SwitchUL60947-4-1A (Formerly UL508) Listed Manual Motor Controllers with Disconnecting MeansOne of the smallest 80 A switches in the industryAdvanced switch technology (use of silver contacts ensures safe and durable operation)Across the line, motor starting - up to 75 hp/600V •General Use Rating - 16 A to 150...

AC (UL Series) and DC (DL Series) DIN Rail Mounted 17.5mm width Thermal Magnetic 240V, 480Y/277V AC, 50/60Hz 125V DC (1 pole); 125/250V DC (2 pole) 10kA Short Circuit Interrupting Capacity HACR Type 40°C Line/Load reversibleDATA SHEET < Product photo imprint will vary depending on part number selection.

DIN Term Blk, Push-In, 3 conn.15A, 600V, 24-14AWG, 3.5mm, blue< Product photo color will vary depending on part number selection.DATA SHEET3D STEP FileAccessories

DIN Term Blk, Push-In, Feed-Thru.20A, 600V, 24-12AWG, 5mm, white< Product photo color will vary depending on part number selection.DATA SHEET

Flush Momentary - Non-Illuminated Metal OperatorClick for Data SheetExploded Assembly ViewUp to six switch contacts can be installed on any non-Illuminated operator Up to four switch contacts can be installed if maintained action attachment (2PPM) is used Switch contacts and operators are sold separately. Preassembled push buttons are...

UL1077/508 Busbar System1-57 different pin configurations 1/2 pole spacing (auxiliary switch) available Power Feeding: Power Feed Lugs (115A), Direct Power Feed (115A), Power Feed Block (200A) UL recognized and listed for Altech’s R-Series, ABL’s UR, V-EA and MA Series of Manual Motor Controllers and Supplementary Protectors UL recognized and...

MMS-32H-26A - Manual Motor Starter UL508 (Manual Motor Controller) UL508 (Type E self-protected Manual Motor Controller) CSA C22.2 No.14 IEC 60947-2 & IEC 60947-4-2FeaturesDIN Rail and Screw Mounting Lockable Handle in OFF position Finger safe terminals Class 10 thermal Overload protectio Trip test feature Phase...

EDF10 SeriesModular Fuse Holder10x38 Midget Fuse HoldersDATA SHEET< Product photo may vary depending on part number selection.

Yellow Lens Module  Click for Data Sheet < Product photo may vary depending on part number selection.

Quick mounting and wiring IP20 Finger Safe DIN Rail or Panel Mount Blocks fit with other DIN Rail mountable modular devices (height 95mm, depth 44.5mm) Accessories increase the number of outputs with only one input (applies only to 38041 and 38032) No caps to open or remove MaterialHousing: PolyamideMetal Body: Plain Copper alloyDATA...

Clamp-Type Test Probe, KLEPS 064 PCH WHITEPlunger Style, 1mm range DATA Sheet Link < Product photo may vary depending on part number selection.

Clamping clip for conduit tubes