×

Home

MMS-63H-10A Manual Motor Starter

MMS-32H-40A
MMS-32H-40A - Manual Motor Starter UL508 (Manual Motor Controller) UL508 (Type E self-protected Manual Motor Controller) CSA C22.2 No.14 IEC 60947-2 & IEC 60947-4-2FeaturesDIN Rail and Screw Mounting Lockable Handle in OFF position Finger safe terminals Class 10 thermal Overload protectio Trip test feature Phase...

38073 - 3 - Pole 175A Plain Brass Power Distribution Block

38073
Quick mounting and wiringIP20 Finger SafeDIN Rail or Panel MountBlocks fit with other DIN Rail mountable modular devicesSame compact size for both ratingsNo caps to open or removeMaterialHousing: PolyamideMetal Body: Plain Copper alloyDATA Sheet Link < Product photo may vary depending on part number...

22.5 (mm) Solid sealing insert

8114252
Multi-hole insert for standard plastic glandsFeatures:Replaces sealing sleeve in Standard Straight-Through Polyamide glandsSolid insert to be drilled as required

Grey CY4 Terminal Block

CY4
DIN Term Blk, Screw, Feed-Thru.30A, 600V, 24-10AWG, 6mm, grey< Product photo color will vary depending on part number selection.DATA SHEET3D STEP FileAccessories

B35X75S/B

B35X75S/B
Wide fingers giving additional cable support Terminated wires can be re-routed easily 0.79" slot pitch 0.31" slot width 18 sizes, available in gray, white, or black UL, CSA and Lloyds Register approvedData SheetDrawing Link

MLK136-3,5-H

MLK136-3,5-H
PCB Term Blk, 3.50mm, 6 Pole, Top wire, green Data Sheet Contact Altech for 3D Step File at info@altechcorp.com

VKA4100N - 100 A 4 pole Extended/Direct Handle Motor Disconnect Switch

VKA4100N
Extended/Direct Handle Motor Disconnect Switch UL60947-4-1A (Formerly UL508) Listed Manual Motor Controllers with Disconnecting MeansOne of the smallest 80 A switches in the industry Advanced switch technology (use of silver contacts ensures safe and durable operation) Across the line, motor starting - up to 75 hp/600V •General Use Rating - 16 A to...

1C10UL - DLS9 - UL489 Miniature Molded Case Circuit Breaker

1C10UL
AC (UL Series) and DC (DL Series) DIN Rail Mounted 17.5mm width Thermal Magnetic 240V, 480Y/277V AC, 50/60Hz 125V DC (1 pole); 125/250V DC (2 pole) 10kA Short Circuit Interrupting Capacity HACR Type 40°C Line/Load reversibleDATA SHEET < Product photo imprint will vary depending on part number selection.

Red - CP1.5/3/R - Terminal Block

CP1.5/3/R
DIN Term Blk, Push-In, 3 conn.15A, 600V, 24-14AWG, 3.5mm, red< Product photo color will vary depending on part number selection.DATA SHEET3D STEP FileAccessories

2AB4 Booted Momentary - Non-Illuminated Metal Operator

2AB4
Booted Momentary - Non-Illuminated Metal OperatorClick for Data SheetExploded Assembly ViewUp to six switch contacts can be installed on any non-Illuminated operator Up to four switch contacts can be installed if maintained action attachment (2PPM) is used Switch contacts and operators are sold separately. Preassembled push buttons are...

1P18U1/22 - UL 508 & UL 1077 - 1 PHASE BUSBAR - standard spacing

1P18U1/22
UL1077/508 Busbar System1-57 different pin configurations 1/2 pole spacing (auxiliary switch) available Power Feeding: Power Feed Lugs (115A), Direct Power Feed (115A), Power Feed Block (200A) UL recognized and listed for Altech’s R-Series, ABL’s UR, V-EA and MA Series of Manual Motor Controllers and Supplementary Protectors UL recognized and...

MMS-63H-13A Manual Motor Starter

MMS-63H-13A
MMS-63H-13A - Manual Motor Starter UL508 (Manual Motor Controller) UL508 (Type E self-protected Manual Motor Controller) CSA C22.2 No.14 IEC 60947-2 & IEC 60947-4-2FeaturesDIN Rail and Screw Mounting Lockable Handle in OFF position Finger safe terminals Class 10 thermal Overload protectio Trip test feature Phase...

30.5 (mm) Solid sealing insert

8114253
Multi-hole insert for standard plastic glandsFeatures:Replaces sealing sleeve in Standard Straight-Through Polyamide glandsSolid insert to be drilled as required
Product added to wishlist
Product added to compare.

This site uses Cookies.