Reset Done
×

Process Controllers

Filters
Selection Guide
Process Controllers - Supply Voltage
12–240V AC/DC(2)
20 to 240V AC; 12 to 240V DC(5)
85-270V AC/DC(30)
90-270V AC/DC(3)
110V AC(3)
110V AC and 24V AC/DC(1)
165 to 300V AC(1)
170 to 290V AC(1)
230V AC(3)
230V AC and 24V AC/DC(1)
280-520V AC(1)
Process Controllers - Main Output
2 SPST - 2NO - 5 @ 230V AC(2)
DPDT -2 C/O - 5A @ 230V AC / 24 V DC(1)
DPDT - 2 C/O - 5A @ 230V AC / 24 V DC, resistive(4)
Selectable- SPDT- 10A @250V AC / 30V DC, resistive OR SSR Drive 12V DC, 50mA(19)
SPDT -1 C/O - 5A @230V AC / 24 V DC, resistive(2)
SPDT - 1 C/O - NO: 5A, 250 V AC and NC:3A, 250 V AC(3)
SPDT - 1 C/O - NO: 5A, NC: 3A@250V AC(1)
SPDT - 1C/O - 8A @ 250V AC(1)
SPDT -1C/O - NO/5A, NC/3A@250V AC(2)
SPDT -1C/O - Relay each for star and delta(2)
SPDT -2 C/O - NO: 5A, 250 V AC and NC:3A, 250 V AC(5)
SPDT- 5A @ 250V AC/ 24V DC, resistive(3)
SPDT - 10A @ 230V AC, resistive Optional- SPST - 20A @ 230V AC, resistive (no alarm)(3)
Process Contollers - Input Voltage
20-240V AC (50/60Hz) and 12-240V DC (5)
20-240V AC/DC (50/60Hz)(2)
85-270 V AC/DC(2)
85-270V AC/DC (50/60Hz)(21)
90-270V AC/DC (50/60Hz)(2)
110/230 V AC (45-65Hz)(2)
230 V AC +/- 15% (45-65Hz) / 110 V AC +/- 15% (45-65Hz)(2)
230V AC and 24V AC/DC (50/60Hz) OR 110V AC and 24V AC/DC (50/60Hz)(2)
230V AC and 110V AC (50/60Hz)(2)
Self Powered 165-300V AC(1)
Self Powered 170-290V AC(1)
Self Powered 280-520 V AC(1)
Process Controllers - Trip Setting
Leakage Current: 10mA-30A / Pre-Alarm: 50-100% of Leakage Current Setting(2)
Phase Failure Trip: 3 Phase voltage less than 154V AC / Phase Imbalance: 30V fixed / Phase Sequence: Yes(1)
Under Current: 0-999A / Over Current: 0.5-1.19kA / Current Asymmetry: 5.0 - 99.9%(2)
Under Voltage: 85-500 V AC [L-L] (3Ø-3 wire) 50-288 V AC [L-N] (3Ø-4 wire), Over Voltage: 85-500 V AC [L-L] (3Ø-3 wire), 50-288 V AC [L-N](3Ø-4 wire), Under Frequency: 45-65Hz,* See Data Sheet for more information(2)
Under Voltage: 170-224V AC / Over Voltage: 236-290V AC(1)
Under Voltage: 280- 520 V AC [L-L] (3Ø-3 wire) 160-300 V AC [L-N] (3Ø-4 wire), Over Voltage: 280-520 V AC [L-L] (3Ø-3 wire) 160-300 V AC [L-N](3Ø-4 wire)*Download Data Sheet for more information(1)
Process Controllers - Hysteresis
0.1-9.9°(3)
0.1-99.9(19)
5-40% of set value(2)
Current: 0.1-99.9A(4)
Voltage: 1-40 V / Frequency: 0.1-2 Hz / Asymmetry: 2-20%(1)
Process Controllers - Electrical Connection
1Ø-2 wire(1)
1Ø-2 wire, 3Ø-3 wire, 3Ø- 4 wire(4)
3Ø-3 wire, 3Ø- 4 wire(2)
Process Controllers - Current
+/- 1% of setting, +/- 2 digits(3)
+/-5% of setting(2)
Process Controllers - Trip Voltage
+/-3% of Full Scale(1)
+/- 5% of Full Scale(1)
Reset Done
Selection Guide
Process Controllers - Supply Voltage
12–240V AC/DC(2)
20 to 240V AC; 12 to 240V DC(5)
85-270V AC/DC(30)
90-270V AC/DC(3)
110V AC(3)
110V AC and 24V AC/DC(1)
165 to 300V AC(1)
170 to 290V AC(1)
230V AC(3)
230V AC and 24V AC/DC(1)
280-520V AC(1)
Process Controllers - Main Output
2 SPST - 2NO - 5 @ 230V AC(2)
DPDT -2 C/O - 5A @ 230V AC / 24 V DC(1)
DPDT - 2 C/O - 5A @ 230V AC / 24 V DC, resistive(4)
Selectable- SPDT- 10A @250V AC / 30V DC, resistive OR SSR Drive 12V DC, 50mA(19)
SPDT -1 C/O - 5A @230V AC / 24 V DC, resistive(2)
SPDT - 1 C/O - NO: 5A, 250 V AC and NC:3A, 250 V AC(3)
SPDT - 1 C/O - NO: 5A, NC: 3A@250V AC(1)
SPDT - 1C/O - 8A @ 250V AC(1)
SPDT -1C/O - NO/5A, NC/3A@250V AC(2)
SPDT -1C/O - Relay each for star and delta(2)
SPDT -2 C/O - NO: 5A, 250 V AC and NC:3A, 250 V AC(5)
SPDT- 5A @ 250V AC/ 24V DC, resistive(3)
SPDT - 10A @ 230V AC, resistive Optional- SPST - 20A @ 230V AC, resistive (no alarm)(3)
Process Contollers - Input Voltage
20-240V AC (50/60Hz) and 12-240V DC (5)
20-240V AC/DC (50/60Hz)(2)
85-270 V AC/DC(2)
85-270V AC/DC (50/60Hz)(21)
90-270V AC/DC (50/60Hz)(2)
110/230 V AC (45-65Hz)(2)
230 V AC +/- 15% (45-65Hz) / 110 V AC +/- 15% (45-65Hz)(2)
230V AC and 24V AC/DC (50/60Hz) OR 110V AC and 24V AC/DC (50/60Hz)(2)
230V AC and 110V AC (50/60Hz)(2)
Self Powered 165-300V AC(1)
Self Powered 170-290V AC(1)
Self Powered 280-520 V AC(1)
Process Controllers - Trip Setting
Leakage Current: 10mA-30A / Pre-Alarm: 50-100% of Leakage Current Setting(2)
Phase Failure Trip: 3 Phase voltage less than 154V AC / Phase Imbalance: 30V fixed / Phase Sequence: Yes(1)
Under Current: 0-999A / Over Current: 0.5-1.19kA / Current Asymmetry: 5.0 - 99.9%(2)
Under Voltage: 85-500 V AC [L-L] (3Ø-3 wire) 50-288 V AC [L-N] (3Ø-4 wire), Over Voltage: 85-500 V AC [L-L] (3Ø-3 wire), 50-288 V AC [L-N](3Ø-4 wire), Under Frequency: 45-65Hz,* See Data Sheet for more information(2)
Under Voltage: 170-224V AC / Over Voltage: 236-290V AC(1)
Under Voltage: 280- 520 V AC [L-L] (3Ø-3 wire) 160-300 V AC [L-N] (3Ø-4 wire), Over Voltage: 280-520 V AC [L-L] (3Ø-3 wire) 160-300 V AC [L-N](3Ø-4 wire)*Download Data Sheet for more information(1)
Process Controllers - Hysteresis
0.1-9.9°(3)
0.1-99.9(19)
5-40% of set value(2)
Current: 0.1-99.9A(4)
Voltage: 1-40 V / Frequency: 0.1-2 Hz / Asymmetry: 2-20%(1)
Process Controllers - Electrical Connection
1Ø-2 wire(1)
1Ø-2 wire, 3Ø-3 wire, 3Ø- 4 wire(4)
3Ø-3 wire, 3Ø- 4 wire(2)
Process Controllers - Current
+/- 1% of setting, +/- 2 digits(3)
+/-5% of setting(2)
Process Controllers - Trip Voltage
+/-3% of Full Scale(1)
+/- 5% of Full Scale(1)
Reset Done
Process Controllers Process Controllers 2

    55XC-P8-CU - Analog Cycle Timer, DPDT

    55XC-P8-CU
    55XC-P8-CU - Analog Cycle Timer, DPDT Panel Mount - Plug In Features• Cyclic With Unequal ON and OFF Time • 6 Time Ranges, Seconds/Minutes/Hours • Universal Supply Voltage • Compact Size • Size: 1/16 DIN 48mm x 48mm • Panel Mount / Plug-in Timer DATA Sheet Link < Product photo may vary depending on part number selection.
    View
    Process Controllers Process Controllers 2

      600DT-CU - Digital Multifunction Timer

      600DT-CU
      600DT-CU - Digital Multifunction Timer 17.5mm DIN Rail Features• 15 Functions • 8 Time Ranges, Seconds/Minutes/Hours • Front Key Pad Setting • Universal supply voltage • Slim, Space Saving Design • DIN Rail Mount • Size: 17.5 mm (width) DATA Sheet Link < Product photo may vary depending on part number selection.
      View
      Process Controllers Process Controllers 2

        600XU-A-1-CU - Analog Multifunction Timer

        600XU-A-1-CU
        600XU-A-1-CU - Analog Multifunction Timer 17.5mm DIN Rail Features• 13 Functions • 10 Time Ranges, Seconds/Minutes/Hours • Front knobs for Time Range, Time Scale and Mode Setting • Slim, Space Saving Design • DIN Rail Mount • Size: 17.5mm (width) DATA Sheet Link < Product photo may vary depending on part number selection.
        View
        Process Controllers Process Controllers 2

          600SD-2-230-CU - Analog Star-Delta Timer

          600SD-2-230-CU
          600SD-2-230-CU - Analog Star-Delta Timer 17.5mm DIN Rail Features• Star Delta • 2 Time Ranges • DIN Rail • Size: 17.5mm (width) DATA Sheet Link < Product photo may vary depending on part number selection.
          View
          Process Controllers Process Controllers 2

            600SD-2-110-CU - Analog Star-Delta Timer

            600SD-2-110-CU
            600SD-2-110-CU - Analog Star-Delta Timer 17.5mm DIN Rail Features• Star Delta • 2 Time Ranges • DIN Rail • Size: 17.5mm (width) DATA Sheet Link < Product photo may vary depending on part number selection.
            View
            Process Controllers Process Controllers 2

              800XU-CU - Analog ON-Delay / Interval Timer, DPDT

              800XU-CU
              800XU-CU - Analog ON-Delay / Interval Timer, DPDT 22mm DIN Rail Features• ON Delay / Interval • 12 Time Ranges, Seconds/Minutes/Hours • Universal Supply Voltage • DIN Rail / Back Panel Mount • Finger Safe Terminals • Size: 22.5mm (width) DATA Sheet Link < Product photo may vary depending on part number selection.
              View
              Process Controllers Process Controllers 2

                800XC-CU - Analog Cycle Timer, DPDT

                800XC-CU
                800XC-CU - Analog Cycle Timer, DPDT 22mm DIN Rail Features• Cyclic with Unequal ON and OFF Time • 6 Time Ranges, Seconds/Minutes/Hours • Universal Supply Voltage • DIN Rail / Back Panel Mount • Finger Safe Terminals • Size: 22.5mm (width) DATA Sheet Link < Product photo may vary depending on part number selection.
                View
                Process Controllers Process Controllers 2

                  600XU - Analog Multifunction Timer

                  600XU
                  600XU - Analog Multifunction Timer 17.5mm DIN Rail Features• 13 Timing Modes – broader than most DIN rail timers in this class. • Universal Voltage (12–240V AC/DC) – simplifies inventory and sourcing. • Front Dial Interface – no DIP switches or programming needed. • Compact DIN Rail Mount – 17.5 mm slim profile saves panel space. • Industrial...
                  View
                  Process Controllers
                  Selection Guide
                  Process Controllers - Supply Voltage
                  12–240V AC/DC(2)
                  20 to 240V AC; 12 to 240V DC(5)
                  85-270V AC/DC(30)
                  90-270V AC/DC(3)
                  110V AC(3)
                  110V AC and 24V AC/DC(1)
                  165 to 300V AC(1)
                  170 to 290V AC(1)
                  230V AC(3)
                  230V AC and 24V AC/DC(1)
                  280-520V AC(1)
                  Process Controllers - Main Output
                  2 SPST - 2NO - 5 @ 230V AC(2)
                  DPDT -2 C/O - 5A @ 230V AC / 24 V DC(1)
                  DPDT - 2 C/O - 5A @ 230V AC / 24 V DC, resistive(4)
                  Selectable- SPDT- 10A @250V AC / 30V DC, resistive OR SSR Drive 12V DC, 50mA(19)
                  SPDT -1 C/O - 5A @230V AC / 24 V DC, resistive(2)
                  SPDT - 1 C/O - NO: 5A, 250 V AC and NC:3A, 250 V AC(3)
                  SPDT - 1 C/O - NO: 5A, NC: 3A@250V AC(1)
                  SPDT - 1C/O - 8A @ 250V AC(1)
                  SPDT -1C/O - NO/5A, NC/3A@250V AC(2)
                  SPDT -1C/O - Relay each for star and delta(2)
                  SPDT -2 C/O - NO: 5A, 250 V AC and NC:3A, 250 V AC(5)
                  SPDT- 5A @ 250V AC/ 24V DC, resistive(3)
                  SPDT - 10A @ 230V AC, resistive Optional- SPST - 20A @ 230V AC, resistive (no alarm)(3)
                  Process Contollers - Input Voltage
                  20-240V AC (50/60Hz) and 12-240V DC (5)
                  20-240V AC/DC (50/60Hz)(2)
                  85-270 V AC/DC(2)
                  85-270V AC/DC (50/60Hz)(21)
                  90-270V AC/DC (50/60Hz)(2)
                  110/230 V AC (45-65Hz)(2)
                  230 V AC +/- 15% (45-65Hz) / 110 V AC +/- 15% (45-65Hz)(2)
                  230V AC and 24V AC/DC (50/60Hz) OR 110V AC and 24V AC/DC (50/60Hz)(2)
                  230V AC and 110V AC (50/60Hz)(2)
                  Self Powered 165-300V AC(1)
                  Self Powered 170-290V AC(1)
                  Self Powered 280-520 V AC(1)
                  Process Controllers - Trip Setting
                  Leakage Current: 10mA-30A / Pre-Alarm: 50-100% of Leakage Current Setting(2)
                  Phase Failure Trip: 3 Phase voltage less than 154V AC / Phase Imbalance: 30V fixed / Phase Sequence: Yes(1)
                  Under Current: 0-999A / Over Current: 0.5-1.19kA / Current Asymmetry: 5.0 - 99.9%(2)
                  Under Voltage: 85-500 V AC [L-L] (3Ø-3 wire) 50-288 V AC [L-N] (3Ø-4 wire), Over Voltage: 85-500 V AC [L-L] (3Ø-3 wire), 50-288 V AC [L-N](3Ø-4 wire), Under Frequency: 45-65Hz,* See Data Sheet for more information(2)
                  Under Voltage: 170-224V AC / Over Voltage: 236-290V AC(1)
                  Under Voltage: 280- 520 V AC [L-L] (3Ø-3 wire) 160-300 V AC [L-N] (3Ø-4 wire), Over Voltage: 280-520 V AC [L-L] (3Ø-3 wire) 160-300 V AC [L-N](3Ø-4 wire)*Download Data Sheet for more information(1)
                  Process Controllers - Hysteresis
                  0.1-9.9°(3)
                  0.1-99.9(19)
                  5-40% of set value(2)
                  Current: 0.1-99.9A(4)
                  Voltage: 1-40 V / Frequency: 0.1-2 Hz / Asymmetry: 2-20%(1)
                  Process Controllers - Electrical Connection
                  1Ø-2 wire(1)
                  1Ø-2 wire, 3Ø-3 wire, 3Ø- 4 wire(4)
                  3Ø-3 wire, 3Ø- 4 wire(2)
                  Process Controllers - Current
                  +/- 1% of setting, +/- 2 digits(3)
                  +/-5% of setting(2)
                  Process Controllers - Trip Voltage
                  +/-3% of Full Scale(1)
                  +/- 5% of Full Scale(1)
                  Reset Done
                  Product added to wishlist
                  Product added to compare.

                  This site uses Cookies.