PID500-2-0-04-CU - Advanced Dual Display, 3 Outputs Temperature Controllers|Process Controllers

PID500-2-0-04-CU - Advanced Dual Display, 3 Outputs Temperature Controllers

Name: PID500-2-0-04-CU - Advanced Dual Display, 3 Outputs Temperature Controllers
Brand: Altech Corp
SKU: PID500-2-0-04-CU

Part Number PID500-2-0-04-CU

PID500-2-0-04-CU - Advanced Dual Display, 3 Outputs Temperature Controllers

7 Segment LED Display

Features

• 4 + 4 digits , 7 segment LED dual display

• TC / RTD Input, Analog input

• ON-OFF, PID

• Heat Cool PID

• °C / °F

• Ramp Soak

• Soft Start

• RS485 Communication (PID500 only)

DATA Sheet Link

< Product photo may vary depending on part number selection.

Analog / Digital Protection Relays

Protection
Altech is pleased to offer a variety of protection relays covering:

Phase Monitoring
Voltage Monitoring
Current Monitoring
Frequency Monitoring

Current Leakage / Ground Fault Monitoring Protection relays help to maintain systems and ensure that proper action is taken when a fault is detected. Such functions help to preserve productivity and operational effectiveness of integral components.

Process Controllers - Supply Voltage: 85-270V AC/DC
Process Contollers - Input Voltage: 85-270V AC/DC (50/60Hz)
Process Controllers - Input Measurement: Thermocouple (J,K,T,R,S,C,E,B,N,L,U,W, Platinel II) / RTD (Pt100) Signal Inputs (-5 to 56mV, 0 to 10V, 0 to 20mA)
Process Controllers - Main Output: Selectable- SPDT- 10A @250V AC / 30V DC, resistive OR SSR Drive 12V DC, 50mA
Process Controllers - Hysteresis: 0.1-99.9
Process Controllers - Power Consumption: 5VA max @230V AC
Process Controllers - Operating Temperature: 0 to 50°C (32 to 122°F)
Process Controllers - Storage Temperature: -20 to 75°C (-4 to 167°F)
Process Controllers - Humidity (Non-Condensing): 85% Relative Humidity
Process Controllers - Weight: 95 grams (.43 lbs)
Process Controllers - Display Type: 7 Segment LED Display
Process Controllers - Digits: 2 rows of 4 digits
Process Controllers - Resolution: 1/0.1 Degree for TC/RTD / Fixed 1 Degree for R and S TC
Process Controllers - Sampling Time: 200msec
Process Controllers - Input Filter (FTC): 1 to 99 sec
Process Controllers - Control Action: 1) PID Control with Auto Tuning 2) ON-OFF Control
Process Controllers - PID: Proportional Band (P): 0-400° Integral Time (I): 0-999 sec Derivative Time (D): 0-200 sec
Process Controllers - Alarm Mode: Deviation High/Low, Absolute High/Low, Band, Sensor Break PID330- Full Scale High, Full Scale Low
Process Controllers - Temperature Unit: °C / °F
Process Controllers - Cycle Time: 0.1 to 100 sec.
Process Controllers - Manual Reset Value: -99.9° to 19.9°
Process Controllers - Set Points: 2
Process Controllers - J, K,T / TC INPUTS*: 0.25% of F.S. ±1°
Process Controllers - R, S INPUTS*: 0.5% of F.S. ±2°
Process Controllers - RTD INPUT: 0.1% of F.S. ±1°
Process Controllers - Auxiliary Output: 2 Selectable- SPST- 5A @230V AC / 30V DC, resistive OR SSR Drive(Voltage Pulse)- 12V DC, 20mA
Process Controllers - Retransmission: 4 to 20mA DC, 0-10V DC (100msec. Update Rate)
Process Controllers - Output 1: 4-20mA
Process Controllers - Output 2: Relay
Process Controllers - Relay/SSR: Relay
Process Controllers - RS485: Yes