Home

DIN Term Blk, Screw, Grnd600V, 24-8AWG, 8mm, yellow/green< Product photo color will vary depending on part number selection.DATA SHEET3D STEP FileAccessories

Enclosure, Polystyrene, Gray, Metric knockouts

Shielded, A-Coded, 3-pin/ 3-wire, 3x24AWG, PVC cable, black

Female, Brass, 22AWG, PVC cable, M16x1.5mm thread, 2.0m, shieleded

Liquid tight strain relief - cable gland for PG48 thread.  Click for Data Sheet or  Click for Full Catalog< Product photo may not be exact.

Ideal for use with slimmer terminal blocks where more access is required Improves appearance of panels with cables out in best position 0.49" slot pitch 0.20" slot width 16 sizes in a choice of gray, white or black UL, CSA and Lloyds Register approved

PCB Term Blk, 3.50mm, 20 Pole, Top wire, green Data Sheet Contact Altech for 3D Step File at info@altechcorp.com

DIN Rail Mounted 17.5mm width per pole Thermal Magnetic 0.3-60A / 480Y/277V AC, 50/60Hz 10kA Short CircuitWithstand Capacity Applications (on the load side of Branch Circuit Protection) include:Sensitive Electronics, Power Supplies, Appliance circuits, etc.DATA SHEET < Product photo imprint will vary depending on part number selection.

OKA Door Mounting Kit for KU Switches Designed for fast and easy assembly. Kit includes handle, shaft, mounting hardware and drill template; it does not include motor disconnect switch. Lockable with up to 3 padlocks.Yellow/Red Handle For use with 3 Pole KU switch No. of auxiliary switches: 2Environmental Rating(UL): (IEC): IP66 DATA SHEET...

DIN Term Blk, Push-In, 3 Conn30A, 600V, 24-10AWG, 6mm, blue< Product photo color will vary depending on part number selection.DATA SHEET3D STEP FileAccessories

DIN Term Blk, Spring, Feed-Thru.20A, 600V, 24-10AWG, 6mm, green< Product photo color will vary depending on part number selection.DATA SHEET

Mushroom Push-Turn - Non-Illuminated Metal OperatorClick for Data SheetExploded Assembly ViewUp to six switch contacts can be installed on any non-Illuminated operator Up to four switch contacts can be installed if maintained action attachment (2PPM) is used Switch contacts and operators are sold separately. Preassembled push buttons are...

Marking Tag< Product photo can vary depending on part number selection.DATA SHEET

UL1077/508 Busbar System1-57 different pin configurations 1/2 pole spacing (auxiliary switch) available Power Feeding: Power Feed Lugs (115A), Direct Power Feed (115A), Power Feed Block (200A) UL recognized and listed for Altech’s R-Series, ABL’s UR, V-EA and MA Series of Manual Motor Controllers and Supplementary Protectors UL recognized and...

RUX-440V - Undervoltage Trips With Switches for Manual Motor StartersFor use with - Manual Motor Starters (MMS Series)DATA SHEET < Product photo may vary depending on part number selection.

Yellow Lens Module  Click for Data Sheet < Product photo may vary depending on part number selection.

Alligator Clip MA 1 Crimp BLUE0.5mm crimp terminal, 4mm range  DATA Sheet Link < Product photo may vary depending on part number selection.

66 Terminal, Pluggable Connection, 35 mm DIN Rail or optional panel mounting*

DIN Term Blk, Screw, Disconnect26A, 600V, 24-10AWG, grey< Product photo color will vary depending on part number selection.DATA SHEET3D STEP File (Contact Altech for 3D Step File)Accessories

Enclosure, Polystyrene, Gray, Metric knockouts

Shielded, A-Coded, 3-pin/ 3-wire, 3x24AWG, PUR cable, black

Female, Brass, 22AWG, PVC cable, M16x1.5mm thread, 5.0m, shieleded

Liquid tight strain relief - cable gland for NPT 3/8" thread.  Click for Data Sheet or  Click for Full Catalog< Product photo may not be exact.

Ideal for use with slimmer terminal blocks where more access is required Improves appearance of panels with cables out in best position 0.49" slot pitch 0.20" slot width 16 sizes in a choice of gray, white or black UL, CSA and Lloyds Register approved

PCB Term Blk, 3.50mm, 21 Pole, Top wire, green Data Sheet Contact Altech for 3D Step File at info@altechcorp.com

DIN Rail Mounted 17.5mm width per pole Thermal Magnetic 0.3-60A / 480Y/277V AC, 50/60Hz Also DC rated 480Y/277V AC0.3-25A: 1 pole - 42V DC; 2 Pole - 80V DC30-60A: 1 pole - 24V DC; 2 Pole - 60V DC 10kA Short Circuit Withstand Capacity Applications Include: AC Motor Starting, Across the Line, AC General Use,AC Resistance, AC Discharge Lamps...

OKA/VKA Door Mounting Kit for KU Switches Designed for fast and easy assembly. Kit includes handle, shaft, mounting hardware and drill template; it does not include motor disconnect switch. Lockable with up to 3 padlocks.Black Handle For use with 3 Pole KU switch No. of auxiliary switches: 0Environmental Rating: (UL): UL Type 4X; (IEC): IP66...

DIN Term Blk, Push-In, 3 Conn30A, 600V, 24-10AWG, 6mm, brown< Product photo color will vary depending on part number selection.DATA SHEET3D STEP FileAccessories

DIN Term Blk, Spring, Feed-Thru.20A, 600V, 24-10AWG, 6mm, yellow< Product photo color will vary depending on part number selection.DATA SHEET

Mushroom Push-Turn Large - Non-Illuminated Metal OperatorClick for Data SheetExploded Assembly ViewUp to six switch contacts can be installed on any non-Illuminated operator Up to four switch contacts can be installed if maintained action attachment (2PPM) is used Switch contacts and operators are sold separately. Preassembled push...

Marking Tag< Product photo can vary depending on part number selection.DATA SHEET

UL1077/508 Busbar System1-57 different pin configurations 1/2 pole spacing (auxiliary switch) available Power Feeding: Power Feed Lugs (115A), Direct Power Feed (115A), Power Feed Block (200A) UL recognized and listed for Altech’s R-Series, ABL’s UR, V-EA and MA Series of Manual Motor Controllers and Supplementary Protectors UL recognized and...

RUX-480V - Undervoltage Trips With Switches for Manual Motor StartersFor use with - Manual Motor Starters (MMS Series)DATA SHEET < Product photo may vary depending on part number selection.

Modular fuse holders have a unique user configurable feature. By using the modular snap kit (parts sold individually) a customer can configure any pole configuration by inserting the connecting element (3 per pole) into the slot in the side of the fuse holder and then pushing them together and inserting the connecting shaft into the handle....