×

Home

Corrugated Tube O-rings for 17

8112807
O-Ring for Corrugated TubesThe O-ring must be mounted into the first groove of the conduit. The conduit with its pre-mounted sealing ring, must be inserted into the SEM gland and simply twisted into the end

B35X50T

B35X50T
Ideal for use with slimmer terminal blocks where more access is required Improves appearance of panels with cables out in best position 0.49" slot pitch 0.20" slot width 16 sizes in a choice of gray, white or black UL, CSA and Lloyds Register approved

MV1315-3,5-H-L

MV1315-3,5-H-L
PCB Term Blk, 3.50mm, 15 Pole, Top wire, green Data Sheet Contact Altech for 3D Step File at info@altechcorp.com

OKA Door Mounting Kit - OKA 0.V - Motor Disconnect Switch

OKA 0.V
OKA Door Mounting Kit for KU Switches Designed for fast and easy assembly. Kit includes handle, shaft, mounting hardware and drill template; it does not include motor disconnect switch. Lockable with up to 3 padlocks.Black Handle For use with 3 Pole KU switch No. of auxiliary switches: 0Environmental Rating(UL): (IEC): IP66 DATA SHEET <...

Red CP4/R - Terminal Block

CP4/R
DIN Term Blk, Push-In, Feed-Thru30A, 600V, 24-10AWG, 6mm, red< Product photo color will vary depending on part number selection.DATA SHEET3D STEP FileAccessories

2AML1 Mushroom Push-Turn - Non-Illuminated Metal Operator

2AML1
Mushroom Push-Turn - Non-Illuminated Metal OperatorClick for Data SheetExploded Assembly ViewUp to six switch contacts can be installed on any non-Illuminated operator Up to four switch contacts can be installed if maintained action attachment (2PPM) is used Switch contacts and operators are sold separately. Preassembled push buttons are...

1P18U1H/10 - UL 508 & UL 1077 - 1 PHASE BUSBAR - 1/2 pole spacing

1P18U1H/10
UL1077/508 Busbar System1-57 different pin configurations 1/2 pole spacing (auxiliary switch) available Power Feeding: Power Feed Lugs (115A), Direct Power Feed (115A), Power Feed Block (200A) UL recognized and listed for Altech’s R-Series, ABL’s UR, V-EA and MA Series of Manual Motor Controllers and Supplementary Protectors UL recognized and...

Corrugated Tube O-rings for 22

8112808
O-Ring for Corrugated TubesThe O-ring must be mounted into the first groove of the conduit. The conduit with its pre-mounted sealing ring, must be inserted into the SEM gland and simply twisted into the end

B35X50T/W

B35X50T/W
Ideal for use with slimmer terminal blocks where more access is required Improves appearance of panels with cables out in best position 0.49" slot pitch 0.20" slot width 16 sizes in a choice of gray, white or black UL, CSA and Lloyds Register approved

MV1316-3,5-H-L

MV1316-3,5-H-L
PCB Term Blk, 3.50mm, 16 Pole, Top wire, green Data Sheet Contact Altech for 3D Step File at info@altechcorp.com

OKA Door Mounting Kit - OKA 1.V - Motor Disconnect Switch

OKA 1.V
OKA Door Mounting Kit for KU Switches Designed for fast and easy assembly. Kit includes handle, shaft, mounting hardware and drill template; it does not include motor disconnect switch. Lockable with up to 3 padlocks.Black Handle For use with 3 Pole KU switch No. of auxiliary switches: 1Environmental Rating(UL): (IEC): IP66 DATA SHEET <...

White CP4/W - Terminal Block

CP4/W
DIN Term Blk, Push-In, Feed-Thru30A, 600V, 24-10AWG, 6mm, white< Product photo color will vary depending on part number selection.DATA SHEET3D STEP FileAccessories

2AML2 Mushroom Push-Turn - Non-Illuminated Metal Operator

2AML2
Mushroom Push-Turn - Non-Illuminated Metal OperatorClick for Data SheetExploded Assembly ViewUp to six switch contacts can be installed on any non-Illuminated operator Up to four switch contacts can be installed if maintained action attachment (2PPM) is used Switch contacts and operators are sold separately. Preassembled push buttons are...
Product added to wishlist
Product added to compare.

This site uses Cookies.