Home

NPT Thread, Cable Gland / ATEX - Polyamide - NPT Click for Data Sheet or Click for Full Catalog< Product photo may not be exact.

Safety Cap-Left The In-Rail Bus System is an extremely flexible bus system suitable for data transmission and power supply. The principle is a printed circuit board with 5 bus lines that is installed into a DIN rail. This bus system can carry 5A per trace with a voltage of up to 63V. Spring contact blocks can be installed in almost any DIN enclosure for...

Enclosure, Polystyrene, Gray with Tinted Transparent Cover, Smooth Sides Standard FeaturesProtection Level: IP66 (NEMA Type: 4X and 12/12K) Technical: Knockout Sidewalls, Gray or tinted transparent cover, Multiple enclosure mounting options UL Recognized Enclosure Material: Polystyrene or Polycarbonate  Gasket Material: Polyurethane...

A-Coded, LED, 4-pin/ 4-wire, 4x24AWG, PVC cable, black

Male, Brass, 24AWG, PVC wires, M20x1.5 thread, 0.5m

PCB Term Blk, 6.35mm, 5 Pole, Plug-in Card, black Data Sheet Contact Altech for 3D Step File at info@altechcorp.com

DIN Rail Mounted 17.5mm width per pole Thermal Magnetic 0.3-60A / 480Y/277V AC, 50/60Hz 10kA Short CircuitWithstand Capacity Applications (on the load side of Branch Circuit Protection) include:Sensitive Electronics, Power Supplies, Appliance circuits, etc.DATA SHEET < Product photo imprint will vary depending on part number selection.

Auxiliary Switch, 1NC, Quick Connect Terminals,Use with LSF or RT Series Motor Disconnect SwitchesDATA SHEET

Jumper, Push-In, 3 pole, 3.5mm spacing, blueuse with CP1.5 Series < Product photo color will vary depending on part number selection.DATA SHEET3D STEP File (Contact Altech for 3D Step File)Accessories

Non-Illuminated Metal Selector Switch OperatorsClick for Data SheetExploded Assembly ViewUp to six switch contacts can be installed with any illuminated operators. Switch contacts and operators are sold separately. Preassembled push buttons are available on request.