×

Home

2AF6RH Recessed Momentary - Non-Illuminated Metal Operator

2AF6RH
Recessed Momentary - Non-Illuminated Metal OperatorClick for Data SheetExploded Assembly ViewUp to six switch contacts can be installed on any non-Illuminated operator Up to four switch contacts can be installed if maintained action attachment (2PPM) is used Switch contacts and operators are sold separately. Preassembled push buttons are...

1P18U1/35 - UL 508 & UL 1077 - 1 PHASE BUSBAR - standard spacing

1P18U1/35
UL1077/508 Busbar System1-57 different pin configurations 1/2 pole spacing (auxiliary switch) available Power Feeding: Power Feed Lugs (115A), Direct Power Feed (115A), Power Feed Block (200A) UL recognized and listed for Altech’s R-Series, ABL’s UR, V-EA and MA Series of Manual Motor Controllers and Supplementary Protectors UL recognized and...

MMS-100H-40A Manual Motor Starter

MMS-100H-40A
MMS-100H-40A - Manual Motor Starter UL508 (Manual Motor Controller) UL508 (Type E self-protected Manual Motor Controller) CSA C22.2 No.14 IEC 60947-2 & IEC 60947-4-2FeaturesDIN Rail and Screw Mounting Lockable Handle in OFF position Finger safe terminals Class 10 thermal Overload protectio Trip test feature Phase...

38059 - 1 pole 800A Plated aluminum Power Distribution Block

38059
Quick mounting and wiring IP20 Finger Safe DIN Rail or Panel Mount Blocks fit with other DIN Rail mountable modular devices (height 95mm, depth 44.5mm) Accessories increase the number of outputs with only one input (applies only to 38041 and 38032) No caps to open or remove MaterialHousing: PolyamideMetal Body: Tin plated aluminumDATA...

M25x1.5 - Straight Conduit Gland for Corrugated Tube

3805013
Quick- Mounting System for Polyflex PA 6 ConduitConduit Gland SEM-FAST Straight for Metric thread.Technical PropertyEasy and tight single hand mountingInsert the tube in the "closed" glandInsert the conduit with a short twist all the way into the end of the conduit gland. Pull the tube back slightly to latch it securely.Conduit can be rotated within the...

Brown CY6/DB Terminal Block

CY6/DB
DIN Term Blk, Screw, Feed-Thru.50A, 600V, 24-8AWG, 8mm, brown< Product photo color will vary depending on part number selection.DATA SHEET3D STEP FileAccessories

B75X50S/B

B75X50S/B
Wide fingers giving additional cable support Terminated wires can be re-routed easily 0.79" slot pitch 0.31" slot width 18 sizes, available in gray, white, or black UL, CSA and Lloyds Register approvedData SheetDrawing Link

B75X75S/W

B75X75S/W
Wide fingers giving additional cable support Terminated wires can be re-routed easily 0.79" slot pitch 0.31" slot width 18 sizes, available in gray, white, or black UL, CSA and Lloyds Register approvedData SheetDrawing Link

Fuse Holder- KKV 332 - Motor Disconnect Switch

KKV 332
This fuse holder can be retrofitted with the KU340N. Therefore, design changes can be incorporated with ease to allow a fusible disconnect.Kit shown; comes with KU340N and fuse holder.Electrical Rating (for more details contact Altech): 30 A/600V AC 30 Fuse Type 10x38, Midget  Kit Includes KV 10x38 / KU340NDATA SHEET

Blue - CP2.5/BU - Terminal Block

CP2.5/BU
DIN Term Blk, Push-In, Feed-Thru20A, 600V, 24-12AWG, 5mm, blue< Product photo color will vary depending on part number selection.DATA SHEET3D STEP FileAccessories

2AF8RH Recessed Momentary - Non-Illuminated Metal Operator

2AF8RH
Recessed Momentary - Non-Illuminated Metal OperatorClick for Data SheetExploded Assembly ViewUp to six switch contacts can be installed on any non-Illuminated operator Up to four switch contacts can be installed if maintained action attachment (2PPM) is used Switch contacts and operators are sold separately. Preassembled push buttons are...

1P18U1/36 - UL 508 & UL 1077 - 1 PHASE BUSBAR - standard spacing

1P18U1/36
UL1077/508 Busbar System1-57 different pin configurations 1/2 pole spacing (auxiliary switch) available Power Feeding: Power Feed Lugs (115A), Direct Power Feed (115A), Power Feed Block (200A) UL recognized and listed for Altech’s R-Series, ABL’s UR, V-EA and MA Series of Manual Motor Controllers and Supplementary Protectors UL recognized and...

MMS-100H-50A Manual Motor Starter

MMS-100H-50A
MMS-100H-50A - Manual Motor Starter UL508 (Manual Motor Controller) UL508 (Type E self-protected Manual Motor Controller) CSA C22.2 No.14 IEC 60947-2 & IEC 60947-4-2FeaturesDIN Rail and Screw Mounting Lockable Handle in OFF position Finger safe terminals Class 10 thermal Overload protectio Trip test feature Phase...

38064 - 1 pole 175A plated aluminum Power Distribution Block

38064
Quick mounting and wiring IP20 Finger Safe DIN Rail or Panel Mount Blocks fit with other DIN Rail mountable modular devices (height 95mm, depth 44.5mm) Accessories increase the number of outputs with only one input (applies only to 38041 and 38032) No caps to open or remove MaterialHousing: PolyamideMetal Body: Tin plated aluminumDATA...
Product added to wishlist
Product added to compare.

This site uses Cookies.