×

Home

B50X50S/W

B50X50S/W
Wide fingers giving additional cable support Terminated wires can be re-routed easily 0.79" slot pitch 0.31" slot width 18 sizes, available in gray, white, or black UL, CSA and Lloyds Register approvedData SheetDrawing Link

MLK1311-3,5-H

MLK1311-3,5-H
PCB Term Blk, 3.50mm, 11 Pole, Top wire, green Data Sheet Contact Altech for 3D Step File at info@altechcorp.com

2AP3 Projecting Momentary - Non-Illuminated Metal Operator

2AP3
Projecting Momentary - Non-Illuminated Metal OperatorClick for Data SheetExploded Assembly ViewUp to six switch contacts can be installed on any non-Illuminated operator Up to four switch contacts can be installed if maintained action attachment (2PPM) is used Switch contacts and operators are sold separately. Preassembled push buttons...

1P18U1/27 - UL 508 & UL 1077 - 1 PHASE BUSBAR - standard spacing

1P18U1/27
UL1077/508 Busbar System1-57 different pin configurations 1/2 pole spacing (auxiliary switch) available Power Feeding: Power Feed Lugs (115A), Direct Power Feed (115A), Power Feed Block (200A) UL recognized and listed for Altech’s R-Series, ABL’s UR, V-EA and MA Series of Manual Motor Controllers and Supplementary Protectors UL recognized and...

P50UT-LP - Power Feed Lug

P50UT-LP
Electrical rating: 115A/1000V AC/DC Wire Ranges: 10-1/0 AWG Cu Wire Temperature Rating: 60°C Required Torque: 5.6Nm (50 lb. in.) Material of Lug: Brass Insulation Material: PolyamideFor use with:UL1077/508 18 and 25sqmm1 phase Busbar

MMS-63H-40A Manual Motor Starter

MMS-63H-40A
MMS-63H-40A - Manual Motor Starter UL508 (Manual Motor Controller) UL508 (Type E self-protected Manual Motor Controller) CSA C22.2 No.14 IEC 60947-2 & IEC 60947-4-2FeaturesDIN Rail and Screw Mounting Lockable Handle in OFF position Finger safe terminals Class 10 thermal Overload protectio Trip test feature Phase...

38075 - 3 - Pole 125A Plain Brass Power Distribution Block

38075
Quick mounting and wiring IP20 Finger Safe DIN Rail or Panel Mount Blocks fit with other DIN Rail mountable modular devices (height 95mm, depth 44.5mm) Accessories increase the number of outputs with only one input (applies only to 38041 and 38032) No caps to open or remove MaterialHousing: PolyamideMetal Body: Plain Copper alloyDATA...

M16x1.5 - Straight Conduit Gland for Corrugated Tube

3805001
Quick- Mounting System for Polyflex PA 6 ConduitConduit Gland SEM-FAST Straight for Metric thread.Technical PropertyEasy and tight single hand mountingInsert the tube in the "closed" glandInsert the conduit with a short twist all the way into the end of the conduit gland. Pull the tube back slightly to latch it securely.Conduit can be rotated within the...

Green CY4/G Terminal Block

CY4/G
DIN Term Blk, Screw, Feed-Thru.30A, 600V, 24-10AWG, 6mm, green< Product photo color will vary depending on part number selection.DATA SHEET3D STEP FileAccessories

B50X50S/B

B50X50S/B
Wide fingers giving additional cable support Terminated wires can be re-routed easily 0.79" slot pitch 0.31" slot width 18 sizes, available in gray, white, or black UL, CSA and Lloyds Register approvedData SheetDrawing Link

2AP4 Projecting Momentary - Non-Illuminated Metal Operator

2AP4
Projecting Momentary - Non-Illuminated Metal OperatorClick for Data SheetExploded Assembly ViewUp to six switch contacts can be installed on any non-Illuminated operator Up to four switch contacts can be installed if maintained action attachment (2PPM) is used Switch contacts and operators are sold separately. Preassembled push buttons...

1P18U1/28 - UL 508 & UL 1077 - 1 PHASE BUSBAR - standard spacing

1P18U1/28
UL1077/508 Busbar System1-57 different pin configurations 1/2 pole spacing (auxiliary switch) available Power Feeding: Power Feed Lugs (115A), Direct Power Feed (115A), Power Feed Block (200A) UL recognized and listed for Altech’s R-Series, ABL’s UR, V-EA and MA Series of Manual Motor Controllers and Supplementary Protectors UL recognized and...

P50UT - Power Feed Lug

P50UT
Electrical rating: 115A/1000V AC/DC Wire Ranges: 10-1/0 AWG Cu Wire Temperature Rating: 60°C Required Torque: 5.6Nm (50 lb. in.) Material of Lug: Brass Insulation Material: PolyamideFor use with:UL1077/508 18 and 25sqmm2, 3 phase Busbar
Product added to wishlist
Product added to compare.

This site uses Cookies.