×

Home

2AB8 Booted Momentary - Non-Illuminated Metal Operator

2AB8
Booted Momentary - Non-Illuminated Metal OperatorClick for Data SheetExploded Assembly ViewUp to six switch contacts can be installed on any non-Illuminated operator Up to four switch contacts can be installed if maintained action attachment (2PPM) is used Switch contacts and operators are sold separately. Preassembled push buttons are...

1P18U1/24 - UL 508 & UL 1077 - 1 PHASE BUSBAR - standard spacing

1P18U1/24
UL1077/508 Busbar System1-57 different pin configurations 1/2 pole spacing (auxiliary switch) available Power Feeding: Power Feed Lugs (115A), Direct Power Feed (115A), Power Feed Block (200A) UL recognized and listed for Altech’s R-Series, ABL’s UR, V-EA and MA Series of Manual Motor Controllers and Supplementary Protectors UL recognized and...

A16PC3-14ND10-AC24V PC Series Contactors - 22A Frame (1 Phase, 3 Phase)

A16PC3-14ND10-AC24
A16PC3-14ND10-AC24 PC Series Contactors - 22A FrameFeaturesMinimum size & Maximum performance Ambient temperatures – 40°C up to + 90°C Designed for the operation under extreme conditions (heat, dust, sand, high humidity, vibrations, shock) • Bounce free, self cleaning aux. contacts, suitable for switching electronic circuits =>...

MMS-63H-22A Manual Motor Starter

MMS-63H-22A
MMS-63H-22A - Manual Motor Starter UL508 (Manual Motor Controller) UL508 (Type E self-protected Manual Motor Controller) CSA C22.2 No.14 IEC 60947-2 & IEC 60947-4-2FeaturesDIN Rail and Screw Mounting Lockable Handle in OFF position Finger safe terminals Class 10 thermal Overload protectio Trip test feature Phase...

38074 - 1 - Pole 175A Plain Brass Power Distribution Block

38074
Quick mounting and wiringIP20 Finger SafeDIN Rail or Panel MountBlocks fit with other DIN Rail mountable modular devices (height 95mm, depth 44.5mm)Accessories increase the number of outputs with only one input (applies only to 38041 and 38032)No caps to open or removeMaterialHousing: PolyamideMetal Body: Plain Copper...

Black CY4/BL Terminal Block

CY4/BL
DIN Term Blk, Screw, Feed-Thru.30A, 600V, 24-10AWG, 6mm, black < Product photo color will vary depending on part number selection.DATA SHEET3D STEP FileAccessories

B50X35S/B

B50X35S/B
Wide fingers giving additional cable support Terminated wires can be re-routed easily 0.79" slot pitch 0.31" slot width 18 sizes, available in gray, white, or black UL, CSA and Lloyds Register approvedData SheetDrawing Link

MLK139-3,5-H

MLK139-3,5-H
PCB Term Blk, 3.50mm, 9 Pole, Top wire, green Data Sheet Contact Altech for 3D Step File at info@altechcorp.com

1C15UL - DLS9 - UL489 Miniature Molded Case Circuit Breaker

1C15UL
AC (UL Series) and DC (DL Series) DIN Rail Mounted 17.5mm width Thermal Magnetic 240V, 480Y/277V AC, 50/60Hz 125V DC (1 pole); 125/250V DC (2 pole) 10kA Short Circuit Interrupting Capacity HACR Type 40°C Line/Load reversibleDATA SHEET < Product photo imprint will vary depending on part number selection.

Grey - CP1.5/4 - Terminal Block

CP1.5/4
DIN Term Blk, Push-In, 4 conn.15A, 600V, 24-14AWG, 3.5mm, grey< Product photo color will vary depending on part number selection.DATA SHEET3D STEP FileAccessories

2AP1 Projecting Momentary - Non-Illuminated Metal Operator

2AP1
Projecting Momentary - Non-Illuminated Metal OperatorClick for Data SheetExploded Assembly ViewUp to six switch contacts can be installed on any non-Illuminated operator Up to four switch contacts can be installed if maintained action attachment (2PPM) is used Switch contacts and operators are sold separately. Preassembled push buttons...

1P18U1/25 - UL 508 & UL 1077 - 1 PHASE BUSBAR - standard spacing

1P18U1/25
UL1077/508 Busbar System1-57 different pin configurations 1/2 pole spacing (auxiliary switch) available Power Feeding: Power Feed Lugs (115A), Direct Power Feed (115A), Power Feed Block (200A) UL recognized and listed for Altech’s R-Series, ABL’s UR, V-EA and MA Series of Manual Motor Controllers and Supplementary Protectors UL recognized and...

MMS-63H-26A Manual Motor Starter

MMS-63H-26A
MMS-63H-26A - Manual Motor Starter UL508 (Manual Motor Controller) UL508 (Type E self-protected Manual Motor Controller) CSA C22.2 No.14 IEC 60947-2 & IEC 60947-4-2FeaturesDIN Rail and Screw Mounting Lockable Handle in OFF position Finger safe terminals Class 10 thermal Overload protectio Trip test feature Phase...
Product added to wishlist
Product added to compare.

This site uses Cookies.