×

Home

B75X100S/B

B75X100S/B
Wide fingers giving additional cable support Terminated wires can be re-routed easily 0.79" slot pitch 0.31" slot width 18 sizes, available in gray, white, or black UL, CSA and Lloyds Register approvedData SheetDrawing Link

Fuse Holder- KV 10x3 - Motor Disconnect Switch

KV 10x38
This fuse holder can be retrofitted with the KU340N. Therefore, design changes can be incorporated with ease to allow a fusible disconnect.For Use with KU340NElectrical Rating (for more details contact Altech): 30 A/600V AC 30 Fuse Type 10x38, MidgetDATA SHEET

Green - CP2.5/G - Terminal Block

CP2.5/G
DIN Term Blk, Push-In, Feed-Thru20A, 600V, 24-12AWG, 5mm, green< Product photo color will vary depending on part number selection.DATA SHEET3D STEP FileAccessories

2AM2 Mushroom Momentary - Non-Illuminated Metal Operator

2AM2
Mushroom Momentary - Non-Illuminated Metal OperatorClick for Data SheetExploded Assembly ViewUp to six switch contacts can be installed on any non-Illuminated operator Up to four switch contacts can be installed if maintained action attachment (2PPM) is used Switch contacts and operators are sold separately. Preassembled push buttons are...

1P18U1/38 - UL 508 & UL 1077 - 1 PHASE BUSBAR - standard spacing

1P18U1/38
UL1077/508 Busbar System1-57 different pin configurations 1/2 pole spacing (auxiliary switch) available Power Feeding: Power Feed Lugs (115A), Direct Power Feed (115A), Power Feed Block (200A) UL recognized and listed for Altech’s R-Series, ABL’s UR, V-EA and MA Series of Manual Motor Controllers and Supplementary Protectors UL recognized and...

A16PC3-22ND10-AC24V PC Series Contactors - 22A Frame (1 Phase, 3 Phase)

A16PC3-22ND10-AC24V
A16PC3-22ND10-AC24V PC Series Contactors - 22A FrameFeaturesMinimum size & Maximum performance Ambient temperatures – 40°C up to + 90°C Designed for the operation under extreme conditions (heat, dust, sand, high humidity, vibrations, shock) • Bounce free, self cleaning aux. contacts, suitable for switching electronic circuits =>...

MMS-100H-75A Manual Motor Starter

MMS-100H-75A
MMS-100H-75A - Manual Motor Starter UL508 (Manual Motor Controller) UL508 (Type E self-protected Manual Motor Controller) CSA C22.2 No.14 IEC 60947-2 & IEC 60947-4-2FeaturesDIN Rail and Screw Mounting Lockable Handle in OFF position Finger safe terminals Class 10 thermal Overload protectio Trip test feature Phase...

38680 - 85 A Cu 65 A Al, UL1953 Power Distribution Blocks

38680
Adjustable Dial allows for Selectiono f L1–L2–L3 phase designation Color Marking Plates in Green, Blue or Red Simple and secure DIN rail locking clip allows easy mounting on DIN Rail Incoming Cable Safety Slide assures IP20 protection with all conductor sizes Connection Clip included with each PD B for Multipole applications Suitable for Aluminum...

PG29 - Straight Conduit Gland for Corrugated Tube

3805016
Quick- Mounting System for Polyflex PA 6 ConduitConduit Gland SEM-FAST Straight for PG thread.Technical PropertyEasy and tight single hand mountingInsert the tube in the "closed" glandInsert the conduit with a short twist all the way into the end of the conduit gland. Pull the tube back slightly to latch it securely.Conduit can be rotated within the...

Red CY6/R Terminal Block

CY6/R
DIN Term Blk, Screw, Feed-Thru.50A, 600V, 24-8AWG, 8mm, red< Product photo color will vary depending on part number selection.DATA SHEET3D STEP FileAccessories

B75X75S/B

B75X75S/B
Wide fingers giving additional cable support Terminated wires can be re-routed easily 0.79" slot pitch 0.31" slot width 18 sizes, available in gray, white, or black UL, CSA and Lloyds Register approvedData SheetDrawing Link

B100X50S

B100X50S
Wide fingers giving additional cable support Terminated wires can be re-routed easily 0.79" slot pitch 0.31" slot width 18 sizes, available in gray, white, or black UL, CSA and Lloyds Register approvedData SheetDrawing Link

1C30UL - DLS9 - UL489 Miniature Molded Case Circuit Breaker

1C30UL
AC (UL Series) and DC (DL Series) DIN Rail Mounted 17.5mm width Thermal Magnetic 240V, 480Y/277V AC, 50/60Hz 125V DC (1 pole); 125/250V DC (2 pole) 10kA Short Circuit Interrupting Capacity HACR Type 40°C Line/Load reversibleDATA SHEET < Product photo imprint will vary depending on part number selection.

Fuse Holder- KV 10x38 CC - Motor Disconnect Switch

KV 10x38 CC
This fuse holder can be retrofitted with the KU340N. Therefore, design changes can be incorporated with ease to allow a fusible disconnect.For Use with KU340NElectrical Rating (for more details contact Altech): 30 A/600V AC 30 Fuse Type Class CCDATA SHEET

2AM3 Mushroom Momentary - Non-Illuminated Metal Operator

2AM3
Mushroom Momentary - Non-Illuminated Metal OperatorClick for Data SheetExploded Assembly ViewUp to six switch contacts can be installed on any non-Illuminated operator Up to four switch contacts can be installed if maintained action attachment (2PPM) is used Switch contacts and operators are sold separately. Preassembled push buttons are...

1P18U1/39 - UL 508 & UL 1077 - 1 PHASE BUSBAR - standard spacing

1P18U1/39
UL1077/508 Busbar System1-57 different pin configurations 1/2 pole spacing (auxiliary switch) available Power Feeding: Power Feed Lugs (115A), Direct Power Feed (115A), Power Feed Block (200A) UL recognized and listed for Altech’s R-Series, ABL’s UR, V-EA and MA Series of Manual Motor Controllers and Supplementary Protectors UL recognized and...
Product added to wishlist
Product added to compare.

This site uses Cookies.