TG Series
Featuring an attractive, high-gloss finish, the TG enclosure series is manufactured from high-quality plastics, with a choice of ABS or Polycarbonate for unsurpassed industrial quality. These high quality materials are impact and flame resistant as well as being halogen free. Rated to protection class IP 67, they are not only dustproof but also reliably protect installed electrical or electronic equipment against ingress of water during short-term submersion. The TG series therefore satisfies the most demanding applications and provides sure protection in harsh industrial environments even for highly sensitive electronics.
- 16 sizes available
- IP67 (NEMA TYPE 4X)
- ABS or Polycarbonate
- Gray or tinted transparent covers
- Smooth Sidewalls
- Stainless Steel cover screws (choice of standard screws or 1/4 turn quick release screws)
- Integral cover retainers
- Integral mounting studs in base
- Recessed cover for label inlays or membrane keypads
- Flame resistant and halogen free
| Drawing and Data Files (If files do not automatically open, save to disk and than open.) | ||||
| TG88-6 – ABS and Polycarbonate – 84 x 82 x 55 mm (3.31 x 3.23 x 2.17 in.) | ||||
| 3D STEP | DWG | 3D PDF | Specification pages | |
| TG88-9 – ABS and Polycarbonate – 84 x 82 x 85 mm (3.31 x 3.23 x 3.35 in.) | ||||
| 3D STEP | DWG | 3D PDF | Specification pages | |
| TG1208-6 – ABS and Polycarbonate – 122 x 82 x 55 mm (4.80 x 3.23 x 2.17 in.) | ||||
| 3D STEP | DWG | 3D PDF | Specification pages | |
| TG1208-9 – ABS and Polycarbonate – 122 x 82 x 85 mm (4.80 x 3.23 x 3.35 in.) | ||||
| 3D STEP | DWG | 3D PDF | Specification pages | |
| TG1212-6 – – ABS and Polycarbonate – 124 x 122 x 55 mm (4.88 x 4.80 x 2.17 in.) | ||||
| 3D STEP | DWG | 3D PDF | Specification pages | |
| TG1212-9 – ABS and Polycarbonate – 124 x 122 x 85 mm (4.88 x 4.80 x 3.35in.) | ||||
| 3D STEP | DWG | 3D PDF | Specification pages | |
| TG1608-6 – ABS and Polycarbonate – 162 x 82 x 55 mm (6.38 x 3.23 x 2.17 in.) | ||||
| 3D STEP | DWG | 3D PDF | Specification pages | |
| TG1608-9 – ABS and Polycarbonate – 162 x 82 x 85mm (6.38 x 3.23 x 3.35 in.) | ||||
| 3D STEP | DWG | 3D PDF | Specification pages | |
| TG1612-9 – ABS and Polycarbonate – 162 x 122 x 90 mm (6.38 x 4.80 x 3.54 in.) | ||||
| 3D STEP | DWG | 3D PDF | Specification pages | |
| TG2012-8 – ABS and Polycarbonate – 202 x 122 x 75 mm (7.95 x 4.80 x 2.95 in.) | ||||
| 3D STEP | DWG | 3D PDF | Specification pages | |
| TG2012-9 – ABS and Polycarbonate – 202 x 122 x 90 mm (7.95 x 4.80 x 3.54 in.) | ||||
| 3D STEP | DWG | 3D PDF | Specification pages | |
| TG2015-9 – ABS and Polycarbonate – 202 x 152 x 90 mm (7.95 x 5.98 x 3.54 in.) | ||||
| 3D STEP | DWG | 3D PDF | Specification pages | |
| TG2516-9 – ABS and Polycarbonate – 252 x 162 x 90 mm (9.92 x 6.38 x 3.54 in.) | ||||
| 3D STEP | DWG | 3D PDF | Specification pages | |
| TG2516-12 – ABS and Polycarbonate – 252 x 162 x 120 mm (9.92 x 6.38 x 4.72 in.) | ||||
| 3D STEP | DWG | 3D PDF | Specification pages | |
| TG3023-9 – ABS and Polycarbonate – 302 x 232 x 90 mm (11.89 x 9.13 x 3.54 in.) | ||||
| 3D STEP | DWG | 3D PDF | Specification pages | |
| TG3023-11 – ABS and Polycarbonate – 302 x 232 x 110 mm (11.89 x 9.13 x 4.33 in.) | ||||
| 3D STEP | DWG | 3D PDF | Specification pages | |
Filters
Filter by
Series
Series
Length (mm)
Length (mm)
Width (in)
Width (in)
Width (mm)
Width (mm)
Depth (mm)
Depth (mm)
Material
Material
IP Protection - IP67
IP Protection
NEMA 4X
NEMA 4X
UL approval
UL approval
Outdoor Use
Outdoor Use
